Nokia 6151

This phone has a Bluetooth® wireless implementation compatible with "Blue&Me™" device.
Phones behaviour or results may differ from those described here due to a different firmware release.

Functions Supported Dial from the car kit Yes Reject incoming call Yes Redial Yes User defined ring tone (kept from the phone) Yes  Network provider name No Conference call Yes Call waiting (second incoming call) Yes Caller ID as stored in the phonebook Yes Contacts download one by one Yes by selection No fully automatic Yes(1) Transfer the audio out to your phone (private call) Yes(2) Muting (Local privacy) Yes SMS reader No

How to pair

Before using your mobile phone with Blue&Me™, you must create a pairing relationship between the mobile phone and Blue&Me™. After this procedure, Blue&Me™ will automatically connect to your phone each time that you enter the car and turn the car's key to the 'on' position.

To create a pairing relationship using manual interaction, follow these steps when the car is not moving:
Navigate to the Blue&Me Setup / Setup, Pairing, and then press <SRC> or <TEL>. Blue&Me™ starts the pairing procedure.
Blue&Me™ shows the mobile phone pairing PIN number on the display screen and also speaks the PIN number.

• Press MENU, select SETTINGS, select CONNECTIVITY, press BLUETOOTH.
• Select SEARCH FOR AUDIO ENHANCEMENTS, press SELECT.
• Select "Blue&Me", Enter the PIN.
  

It is suggested to enable the automatic connection between Blue&Me™ and the phone.

Phonebook download

If your mobile phone doesn't support automatic downloading during phone pairing, or if you want to send individual contact entries to "Blue&Me™", the ADD CONTACTS item will be available in the USER DATA menu.
To add mobile phone contacts to "Blue&Me™" using manual interaction:
While a mobile phone is connected to "Blue&Me™", navigate to SETTINGS, USER DATA, and then select ADD CONTACTS.
Then on the mobile phone proceed as follows:

Sending contacts one-by-one

• Select MENU, select CONTACTS
• Select FIND, select the contact, select DETAILS
• Select OPTIONS, select SEND BUS CARD, select VIA BLUETOOTH
• Select Blue&Me

Tips & Tricks

(1) Contacts download:

• Unles SyncML is set only contacts stored on the phone are downloaded. For each contact is downloaded only the predefined number.
• Contacts downloaded by SyncML

  In order for a phone to be able to successfully transfer phonebook data to the device, the phone requires the device to be setup as a "SyncML Client".
  Follow the below instructions for setting up the client device on a Bluetooth phone in order to use SyncML for phonebook downloading to the Blue&Me™ device.

  SyncML Setup:

  Note: [Enter] Accomplished by pressing IN on the joystick/Dpad.

  • From your phone, press Menu (key).
  • Select SETTINGS, press [Enter], select DATA TRANSFER, press [Enter].
  • Highlight PC SYNC, press OPTIONS, select ADD CONTACT, press [Enter].
  • Select PHONE SYNC, press [Enter].
  • Verify that CONNECTION is set to VIA BLUETOOTH.
  • Highlight RENAME TRANSFER CONTACT, press [Enter], change name to "Blue&Me", press OK or [Enter].
  • Select DONE and save configuration by pressing YES or [Enter].

    Note: SyncML is case sensitive concerning the host name. Be sure to enter "Blue&Me" with that case.

(2) Audio transfer:

• The phone disconnects Bluetooth when user transfers the audio path to the phone. To workaround the problem while disconnected press <TEL> button twice to re-establish the connection and transfer the audio path back to the Blue&Me™ device.

Read firmware version:

• From the phone's splash screen
• Press *#0000#